Product center
For different industries and businesses, provide product types in different industries
Product categories
-
JENET® 5G/4G IIoT Gateway
-
JETRUN-MOM System
-
Jetron IIoT Intelligent Cloud Platform
-
MEScada Jetron Edge Dual Fusion Suite
-
Jetron-APC Algorithm and Software
-
Rockwell Automation
-
Belden/Hirschmann
-
Panduit
-
Stratus
-
Hoffman
-
Tofino
844D High Frequency
The 844D Blind and All-Through Shaft Incremental Encoders mount directly on the monitored axis via a separate collar on the encoder, eliminating the need for mounting plates and flexible couplings. When installing all-through shaft models, the monitored shaft is fully inserted into the encoder, while blind shaft models require only the end of the shaft to be inserted.
842A Multi-Turn Magnetic
The 842A multi-turn magnetic encoder is a 25-bit absolute multi-turn shaft encoder. Provides up to 8192 pulses per turn, or up to 8192 turns. It uses a technology called Synchronous Serial Interface (SSI) to provide 24-bit resolution over just 5 wires. The synchronous serial interface outputs of the 842A encoder can be connected in a number of different ways.
842D DeviceNet Multi-Turn Magnetic
The 842D DeviceNet™ Multi-Turn Magnetic Encoder is a 26-bit absolute multi-turn shaft encoder that connects directly to DeviceNet. This networking feature eliminates the need for dedicated input cards. It connects to the DeviceNet trunk using a five-pin miniature quick splitter. Connect up to 63 842D DeviceNet encoders to a PLC or other logic system via a single network connection.
842E EtherNetIP
The 842E EtherNet/IP™ absolute encoder features dual-port Ethernet and M12 connectors, providing customers with simple, cost-effective installation. Each encoder also includes an embedded Ethernet/IP switch for connecting to other EtherNet/IP-enabled products in the family, or to support device-level rings for Ethernet media redundancy. These encoders offer high performance and reliability in harsh industrial environments.
842E-CM Integrated Motion Control Based on EtherNetIP
The 842E-CM EtherNet/IP™-based integrated motion absolute encoder is ideal for motion control applications that require a feedback-only axis. These encoders support standard motion control instructions set up in the Studio 5000™ Logix Designer application. These encoders provide auxiliary feedback directly over the EtherNet/IP network, eliminating the need for point-to-point wiring. They can be used in a variety of network topologies such as line, ring or star. These encoders utilize the CIP synchronization protocol, a time synchronization extension that is fully compliant with IEEE 1588.
842HR Sine Cosine
The 842HR sine/cosine encoder is a 15-bit serial encoder for high-performance digital servo drive systems requiring absolute feedback for position control and high-resolution incremental feedback for speed control. This encoder integrates communication, speed regulation and position control into one device.
845D single lap
The 845D singleturn is a heavy duty NEMA Type 4 singleturn absolute position encoder that digitizes shaft angular position into one of several absolute code formats. The encoder has a unique digital output for each axis position. It uses a single laser diode and fiber optic assembly to generate a focused beam that passes through an encoded disk and is sensed as an advanced optical signal.
845G single-turn high performance
The 845G Singleturn is a NEMA Type 4 and 13 singleturn absolute encoder for use in harsh conditions. We have made improvements to this encoder to incorporate the higher performance of the 845GM encoder into a standard size 25 package.
845GM single turn, zero locating pin
The 845G Singleturn is a NEMA Type 4 and 13 singleturn absolute encoder for use in harsh conditions. We have made improvements to this encoder to incorporate the higher performance of the 845GM encoder into a standard size 25 package.
Linear Servo Motor
LDC-Series™ and LDL-Series™ Linear Servo Motors provide precise linear positioning at ultra-high speeds. Direct Drive™ linear motors connect directly to the load that needs to be moved. This direct connection provides excellent servo responsiveness, reducing settling time for any movement. The LDL-Series is an ironless design for applications that require very smooth motion such as scanning or printing. The LDC-Series is a strong density iron core design for smaller, less expensive motors.
HPK-Series High Power
HPK-Series™ high power asynchronous motors combine high power with precise positioning capabilities. These motors employ windings optimized for servo control combined with high-resolution feedback to provide the precision required by the application. They are built on proven induction motor technology to provide high reliability and durability in demanding applications.
Kinetix 6000M Integrated Drive Motor System
The 2094 Kinetix® 6000M Integrated Drive Motor System combines high performance MP-Series™ food grade servo motors and Kinetix 6000 servo drive technology into one compact system. This system greatly saves space and simplifies the machine control system. This machine-side mount solution integrates seamlessly with our Kinetix 6000 and Kinetix 6200 multi-axis servo drive systems and is designed to help reduce wiring time and simplify wiring.
上一页
1
2
3
下一页
Contact Us
Building 6, Ningxing Jiali Plaza, No. 185 Mingxin Road, Yinzhou District, Ningbo City
Tel:( 86-574 ) 87861201
Fax:( 86-574 ) 87861200
Official Account
WeChat Channel
© 2021 JETRON Powered by www.300.cn 浙ICP备12043472号-1 SEO